Install Instructions:
Specification:
① Power:d.c 6V
② Power consumptionin static:≤0.5mW(d.c)
③ Ambient temperature:1 — 55℃, Humidity: ≤95% R.H
④ Suitable water pressure:0.05MPa - 0.6MPa
⑤ Detection zone:50cm(±15%)(To Standard White Board)
⑥ Dia.of inlet/outlet pipe:(DN15)G1/2″
⑦ Dimensions: 80x130x90mm
⑧Standard: CJ/T194-2004
Features & Functions:
Flush Automatically: After being used, the urinal will flush automatically by the sensor flusher.
Clean & Hygienic: Self-open and close w/o any touch can effectively avoid cross infection of bacteria.
Smart Deodorant: When the urinal is not used for a long time, it will flush automatically every 12 hours to prevent the
trap from drying up and odor reversing.
Water-saving: It can adjust flushing time automatically according to different using frequency, saving water very
dramatically.
Intelligent Control: Its control circuit is super mini-designed & controlled by micro-computer. The detection zone has been
configured before ex-factory. Any manual adjustment is needless.
Power Insufficient Reminder: When batteries run out, its indicator will flash to remind you to change batteries.
Power Saving: 4pcs of AA alkaline batteries can last for 2 years based on 300 cycles/day.
Easy to install: Exposed design, do not need to embed the sensor part. Installation fast and easy.
Convenient to Maintain: With a built-in flow rate controller & filter, non-professionals can easily adjust water volume and
clean filter.
Use Instructions:
|